2013 Suzuki RMZ 250

rmz_studio

Balancing Act: Suzuki juggles the art of making more power while trying to keep the noise down

RMZ_OPENER

Since Suzuki went it alone in the 250cc class after the split with Kawasaki following their 2004–2006 alliance, the RMZ250 has been an impressive bike, always near the top in tests and comparisons around the world. Suzuki has a knack of making its motocross bikes fun and exciting to ride with a light, whip-it-off-every-jump feel and a quick-revving, ever-competitive powerband.

The company was at the forefront of introducing EFI into motocross and has managed to keep making strides forward with the 250Z. The 2011­–2012 models were all but the same when the GFC hit the Japanese companies and slowed development. But the wheels are spinning again for 2013 and the new model comes with plenty of updates and changes that should keep the yellow brethren excited.

Recent major race track success in Australia and the US has eluded the RMZ250, but that isn’t a reflection on the production bike as it remains one of the most popular in the class and highly regarded in racing circles. The list of changes appears to have the new model bounding forward, so we were eager to get on board and spend another day getting a little loose on the yellow screamer.

1

What’s new?

The motor gets some massaging for 2013 with a new piston, new cams, new exhaust and new transmission as well as a new ignition and the addition of EFI couplers to plug in the exact style of power you’re after. These changes are what most serious racers did to their RMZs over the past two seasons, so the production performance level should be increased for 2013.

The suspension doesn’t miss out with Suzuki introducing the Showa Separate Function Fork (SFF), similar to what’s on the KX250F. The shock also gets a revised setting to match the fork, the frame gets a tweak here and there and the graphics are updated.

On paper, all the updates are common sense changes that should increase performance across the board and keep the RMZ near the top of the pile in the ultra-competitive MX2 class.

2

What’s the new motor like?

For all the changes, you’d expect the motor to be an improvement over 2012. The reality is that it doesn’t really come across on the track. It’s still eager and responsive off the bottom, has a good surge through the mid and revs out adequately at the top, but at no stage does it feel like there’s a major boost in power over the ’12 model.

My suspicion is the gains made by the lighter piston and updated cams have been offset by the new ultra-quiet FIM-approved exhaust. The RMZ doesn’t really get a chance to flex its new muscle as it feels and sounds as if it’s choked up by the new exhaust.

In the current era, riders and teams will need to find extra power in other areas as the simple solution of bolting up a bigger, louder exhaust is now out of date. While we welcome a quiet bike, the sound of the standard RMZ is hardly music to the ears of many riders.

Something that rates a mention is the new radiators. For 2013, Suzuki has upsized its radiators to reduce overheating; the RMZ had a tendency to boil and steam in mud or sand races. While we didn’t drag the bike through a mud bog for hours on end to test the new cooling system, we did keep it running for long periods of time with stop-start riding while doing photos and the usual white cloud under the bike didn’t appear.

Do he new EFI couplers work?

The system Suzuki has used is very similar to that of the KXF range where the bike comes with the stock coupler as well as a leaner and a richer one. The leaner one is for more aggressive power that pumps up the response and bottom end, while the richer one broadens the power out to make it more manageable on hard-pack or muddy tracks. It’s a simple feature that is noticeable.

3

What would we do to the motor?

OK, to unleash the real potential of the stock motor, simply use the leaner coupler and match it to the exhaust of your choice. For 2013, the US will be using the 115dB limit on a two-metre max test and, unless you’re racing the MX Nats in Australia, that exhaust will pass any noise testing done here. As Europe runs an 112dB limit, all Euro-built exhausts will pass noise testing in Australia.

Those two simple changes bring the RMZ 250 to life and put fun and excitement back in the power.

What are the new forks like?

For those new to the SFF units, here’s a quick breakdown of how they work. In one leg you have the compression side of the fork while the other leg controls the rebound and they work together as a bolted unit. They also offer an external preload adjuster, which is a handy tool.

Right out of the box, the fork uses up a lot of travel under heavy brakes and on downhills, which leads to some mild headshake when hauling it down from speed. It’s more of a busy feel in the front end than a full tank-slapping, bar-to-bar headshake, but with a couple of clicks firmer on the pre-load adjuster the majority of the looseness was gone. It kept the bike sitting taller in the front end, stopped the dive under brakes and gave the bike a more controlled feel entering turns.

How’s the handling?

Once the fork’s been dialled in, the bike offers one of the best rides in the class. The Suzuki traits of quick-steering, lightweight feel and precise turning are immediately evident and the RMZ is still the owner of the inside line.

Combining responsive power and a sharp chassis, the RMZ feels like a powered BMX in the handling department. It’s easy to turn, sticks a little and jumps like a Russian gymnast. We’ve long been fans of Suzuki’s take on motocross handling and the 2013 RMZ is no exception.

Our opinion

Despite a heap of changes on paper, the on-track difference between the 2012 and 2013 models isn’t much. But with the two easy-to-make FOC changes — the lean coupler and the fork preload — the gap starts to widen. Toss in an exhaust that enhances the power and doesn’t annihilate it and we start to see the true potential of the 2013 RMZ. It’s not the most powerful on the track but it does have strong performance across the board with a solid motor, good suspension and excellent handling.

The only thing we couldn’t test is the durability of the new transmission. But if it’s a stronger, more durable cog box than on previous RMZs, that just adds to the appeal of the new bike. And it’s still the four-stroke that’s most fun to ride.

Damien Ashenhurst
About Damien Ashenhurst 1582 Articles
Damien is the editor who’s not afraid to get his hands dirty at the track and on the trails.
  • seo

    Hello Web Admin, I noticed that your On-Page SEO is is missing a few factors, for one you do not use all three H tags in your post, also I notice that you are not using bold or italics properly in your SEO optimization. On-Page SEO means more now than ever since the new Google update: Panda. No longer are backlinks and simply pinging or sending out a RSS feed the key to getting Google PageRank or Alexa Rankings, You now NEED On-Page SEO. So what is good On-Page SEO?First your keyword must appear in the title.Then it must appear in the URL.You have to optimize your keyword and make sure that it has a nice keyword density of 3-5% in your article with relevant LSI (Latent Semantic Indexing). Then you should spread all H1,H2,H3 tags in your article.Your Keyword should appear in your first paragraph and in the last sentence of the page. You should have relevant usage of Bold and italics of your keyword.There should be one internal link to a page on your blog and you should have one image with an alt tag that has your keyword….wait there’s even more Now what if i told you there was a simple WordPress plugin that does all the On-Page SEO, and automatically for you? That’s right AUTOMATICALLY, just watch this 4minute video for more information at. Seo Plugin

  • There are thousands of targeted website viewers ready to view your website, get started for free today: http://mariowelte.de/8ajy

  • There are thousands of targeted website viewers ready to view your website, get started for free today: http://yxbp.com/9xxk

  • I adore this website – its so usefull and helpfull

  • Hey there, neat web-site you’ve here

  • Perfectly pent content material, Really enjoyed reading.

  • Wow, such a invaluable websites

  • Thanks pertaining to delivering these very good written content

  • You’ve probably the greatest webpages

  • Together with almost everything that seems to be developing within this area, your perspectives are fairly exciting. Nevertheless, I beg your pardon, but I do not give credence to your whole idea, all be it refreshing none the less. It appears to everyone that your commentary are actually not completely validated and in fact you are your self not really fully certain of your point. In any event I did take pleasure in looking at it.

  • Fantastic website. Lots of helpful info here. I am sending it to several pals ans also sharing in delicious. And obviously, thanks on your effort!

  • It’s appropriate time to make some plans for the future and it’s time to be happy. I have read this post and if I could I desire to suggest you some interesting things or suggestions. Perhaps you can write next articles referring to this article. I want to read more things about it!

  • Thanks on your marvelous posting! I actually enjoyed reading it, you might be a great author.I will be sure to bookmark your blog and definitely will come back later in life. I want to encourage continue your great writing, have a nice weekend!

  • Pingback: Google()