2013 KTM 125 & 250 SX

2013 KTM 125 & 250 SX

Double-Deuce: We spent some quality on-track time with these two and they were so much fun we had to be asked to give them back

Story Shane Booth | Photography KTM

2013 KTM 125 & 250 SX

There’s no doubt Australian motocross is in the middle of a two-stroke resurgence. The 250 is creeping into the U19s class while there are full grids of 125s at plenty of junior motocross races.

Over the past few years, they haven’t been high on most racers’ priority list; all the interest has been on four-stroke development. But it seems now people are looking back into two-strokes, asking about how they go, what jetting to run and the best mods to get that little bit extra out of them.

KTM is one of only a handful of manufacturers worldwide that continue to produce two-stroke motocross bikes — and probably the only one to continue any sort of development, even if it’s a very small amount.

I had the opportunity to take the 2013 KTM 125 SX and 250 SX out on track at the recent KTM worldwide launch in Italy. I had spent a day and a half riding all the new four-strokes before I got to the two-strokes and it was the first time I’d really gone back to back from current four-strokes to two-strokes. It was interesting: it did take a few laps to get back in the groove of riding the two strokes, getting the right combo of throttle and clutch to keep the power in the sweet spot. But once I did, man, they were not only fun but impressive.

2013 KTM 125 & 250 SX (2)

Quarter-litre

The 250 SX was up first. As soon I manoeuvred it off the stand and out of the tight lineup of bikes, I could feel how light it was even before I’d thrown a leg over it. I fired it up and headed out on the track with the familiar feel of a two-stroke engine tingling away underneath me.

I stopped at the track entry, put the bike in neutral and, after letting it warm up, gave it a few long revs. It blew some smoke to start with then cleared out to a crisp bark and I was good to go. A few corners in and the Città di Castello track turned hard left and straight up a hill. That’s where I remembered how much power a 250 two-stroke had to unleash — so much more brutal than any of the four-strokes but, once you had the bike upright and pointed in a straight line, that didn’t really matter.

There is more grunt right through the power delivery than most riders will ever need. The 250 two-stroke required some finesse and real throttle control to get the power to the ground on the hard, slick corner exits. If you were to get too excited on the throttle, make no mistake: a 250 two-stroke will reach up and bite you quicker than an angry brown snake. But ride with some respect and patience and you can stay just as smooth as on a four-stroke, even on hard pack.

As smooth, yes, but as fast? I’m not convinced. I didn’t have a chance to compare any lap times between the 250 two-stroke and four-stroke — it’s just a little tough at a launch — but there is no doubt the four-stroke can get power down more efficiently and quite a bit earlier in a turn than the two-stroke.

The 250 SX handled very well; the actual weight saving of a two-stroke combined with the lighter feel of a two-stroke engine makes a huge difference. The 250SX is actually 6.6kg lighter than the 250SXF. Combine it with the lighter feeling of the two-stroke engine and it probably feels more like 10 kilos lighter.

With bodywork updated in line with the four-strokes, KTM’s two-strokes feel current — something they have over other brands, which can feel slightly dated and take a little longer to adapt to. It’s a bike with a modern feel and exciting to ride. Though it doesn’t have a proper home at the races any more, you can still be competitive on one at the right tracks in the Lites class.

2013 KTM 125 & 250 SX (3)

One Twenty-Five

The 125 weighs in at a lightweight 90.6kg so you can really have your way with this bike. I spent a lot of years racing 125s, but it had been a while since I’d ridden one for more than a couple of laps and I think I’d forgotten how much fun they actually are.

It’s all about keeping the bike in the small window of usable power. Gear shifts are key and the correct gear selection will make or break you. I say a small window of usable power because, compared to four-strokes, that’s what it is.

However, on this hilly, hard-pack track I had the 125 pulling gears on the way up hills and had no problem jumping everything on the track. For a 125, this engine has a wide power delivery: it’s torquey enough to keep pulling up steep hills and it still revs hard enough to hold a gear if you have to.

Spending some time on one again made me realise you really require skills you don’t learn if you’ve only raced four-strokes. I’m not saying you have to be a better rider to get the most out of a 125 but you do need particular skills. Clutch and throttle control will help you milk absolutely everything out of the small-capacity engine; it will also allow you to get away with carrying a higher gear in some places, which is an advantage.

Coming straight off the 250F and 250SX, it blew me away how light this bike is. I’d never ridden a 125 back to back with a four-stroke and there are definite advantages to the lighter weight. I could put this bike wherever I wanted, whenever I wanted. There was no real need to set up lines too early as you may have to on the heavier bikes. Breaking late is no problem because of the smaller mass that needs to be stopped. The clutch is feather light and, as it’s hydraulic, you don’t need to adjust it on the fly.

This thing is a great bike and it will leave you with an ear-to-ear grin when you take your helmet off. If I had my way, every junior rider would have to spend at least 12 months racing a 125 — there is so much you can learn from riding them. And this is proof KTM hasn’t given up on that theory, either.

New For 2013

Bofy Work

KTM has updated bodywork in line with its four-stoke range, showing its commitment to the two-strokes.

Reed Block

A new V-Force 4-reed valve block improves throttle response and power delivery.

DDS Clutch

The 250 receives a new Damped Diaphragm Steel clutch which reduces the lever force required to activate the clutch. It’s also thinner by 5mm and 250g lighter than the old version.

KTM125SX

Displacement: 124.8cc

Bore/stroke: 54×54.5mm

Transmission: 6-speed

Starter: Kick-start

Fuel system: Keihin PWK 38S AG

Final drive: 13:50

Handlebar: Renthal

Front suspension: WP-USD, closed cartridge 48mm

Rear suspension: WP monoshock with linkage

Fuel capacity: 7.5L

Weight: 90.8kg (without fuel)

KTM250SX

Displacement: 249cc

Bore/stroke: 66.4×72mm

Transmission: 5-speed

Starter: Kick-start

Fuel system: Keihin PWK 36S AG

Final drive: 13:48

Handlebar: Renthal

Front suspension: WP-USD, closed cartridge 48mm

Rear suspension: WP monoshock with linkage

Fuel capacity: 7.5L

Weight: 96.3kg (without fuel)

Damien Ashenhurst
About Damien Ashenhurst 1721 Articles
Managing Editor of DIRT ACTION magazine. Damo doesn't like cheese or ISIS. Can often be found riding in mud because it's closest to the natural environment of a squid.

7 Comments

  1. Really great information can be found on web blog. “Even if happiness forgets you a little bit, never completely forget about it.” by Donald Robert Perry Marquis.

  2. I have been exploring for a little bit for any high quality articles or weblog posts in this kind of house . Exploring in Yahoo I ultimately stumbled upon this website. Reading this information So i¦m glad to express that I have an incredibly just right uncanny feeling I came upon just what I needed. I such a lot undoubtedly will make sure to don¦t disregard this website and provides it a look on a continuing basis.

  3. I’ve been absent for a while, but now I remember why I used to love this blog. Thanks, I will try and check back more often. How frequently you update your web site?

  4. Hello Web Admin, I noticed that your On-Page SEO is is missing a few factors, for one you do not use all three H tags in your post, also I notice that you are not using bold or italics properly in your SEO optimization. On-Page SEO means more now than ever since the new Google update: Panda. No longer are backlinks and simply pinging or sending out a RSS feed the key to getting Google PageRank or Alexa Rankings, You now NEED On-Page SEO. So what is good On-Page SEO?First your keyword must appear in the title.Then it must appear in the URL.You have to optimize your keyword and make sure that it has a nice keyword density of 3-5% in your article with relevant LSI (Latent Semantic Indexing). Then you should spread all H1,H2,H3 tags in your article.Your Keyword should appear in your first paragraph and in the last sentence of the page. You should have relevant usage of Bold and italics of your keyword.There should be one internal link to a page on your blog and you should have one image with an alt tag that has your keyword….wait there’s even more Now what if i told you there was a simple WordPress plugin that does all the On-Page SEO, and automatically for you? That’s right AUTOMATICALLY, just watch this 4minute video for more information at. Seo Plugin

Comments are closed.